Understand UK and EASA Part 21 approvals, including DOAs, POAs, Type Certificates, STCs, production conformity and Form 1 release documents.

Part 21 Approvals: DOA, POA and Type Certificates

Photo by Markus Spiske on Pexels
About the author:
David Sutton
Licensed aircraft engineer

If you’re a licensed aircraft engineer, mechanic, or avionics technician, create your free AeroTechCareers profile to showcase your competencies and be found by recruiters actively searching for engineers like you.

Get started

Part 21 Approvals Explained: Design Organisations, Production Organisations and Type Certificates

Part 21 is the regulatory framework governing the certification, design, production and approval of civil aircraft products and articles. In the UK, the framework is administered by the UK Civil Aviation Authority (CAA). In the European Union, the equivalent framework is administered by the European Union Aviation Safety Agency (EASA).

Part 21 establishes the relationship between three essential elements:

  • Design approval, normally managed through a Design Organisation Approval (DOA)
  • Production approval, normally managed through a Production Organisation Approval (POA)
  • Product certification, including the issue of a Type Certificate (TC)

These approvals are connected, but they are not interchangeable. A design organisation establishes that a product complies with the applicable certification requirements. A production organisation demonstrates that each manufactured product conforms to the approved design. The competent authority then issues the relevant certificate or approval.

What does Part 21 cover?

Part 21 applies to the certification and continuing airworthiness of aircraft, engines, propellers, parts and appliances. It includes requirements for:

  • Type Certificates and restricted Type Certificates
  • Supplemental Type Certificates (STCs)
  • Changes and repairs to approved products
  • Parts and appliances
  • Environmental protection approvals
  • Design Organisation Approvals
  • Production Organisation Approvals
  • Certificates of Airworthiness and export airworthiness documents
  • Airworthiness directives and the reporting of unsafe conditions

For the current UK framework, consult the UK CAA Part 21 guidance. EASA publishes its applicable requirements through its Easy Access Rules for Initial Airworthiness.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Artem Podrez on Pexels

The appropriate approval route depends on the product and the organisation involved. A company designing a major modification may need design approval privileges, while a company manufacturing an already approved component may need production approval and an appropriate release document.

Design Organisation Approval, Part 21 Subpart J

Part 21 Subpart J sets out the requirements for a Design Organisation Approval (DOA). The approval confirms that an organisation has the competence, procedures, personnel and design assurance system needed to carry out approved design work.

A DOA may cover work involving:

  • Complete aircraft
  • Engines and propellers
  • Structural and systems changes
  • Repairs
  • Parts and appliances
  • Supplemental Type Certificates
  • Design data supporting production and continuing airworthiness
  • Airworthiness, operational suitability and environmental characteristics

The organisation’s approved scope is defined in its Terms of Approval. A DOA therefore does not provide unrestricted authority to design every type of aviation product. The scope may be limited by product category, aircraft type, technical discipline or specific privileges. EASA’s overview of design organisation approvals provides further regulatory context.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Peter Xie on Pexels

Requirements under Subpart J

A design organisation must establish a documented design assurance system. This system must control the organisation’s design activities and provide confidence that the design complies with the applicable certification specifications and environmental requirements.

The organisation normally documents its system in a Design Organisation Handbook, prepared in accordance with Part 21, including point 21.A.243. The handbook is a working document that describes matters such as:

  • Organisation structure and responsibilities
  • Design procedures
  • Independent checking and verification
  • Methods for demonstrating compliance
  • Control of design data
  • Qualification and competence of personnel
  • Management of changes and repairs
  • Reporting and corrective action processes
  • Coordination with the competent authority

The holder of a DOA is responsible for keeping the handbook consistent with its design assurance system and ensuring that the approved procedures are used in practice. This includes maintaining effective independent checking and verification controls. For related maintenance compliance principles, see who can perform an independent inspection.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Joe Ambrogio on Pexels

The organisation must also determine that products, changes and repairs within its approval scope:

  • Comply with the applicable specifications and requirements
  • Do not contain unsafe features

The organisation must provide the authority with statements and supporting documentation confirming compliance, except where an applicable privilege allows it to approve specified work directly under Part 21.

DOA privileges

The exact privileges depend on the organisation’s Terms of Approval and the privileges granted under Part 21. An appropriately approved design organisation may, for example:

  • Classify changes as minor or major
  • Approve certain minor changes
  • Approve certain repairs
  • Approve data for production
  • Support or issue compliance findings within its approved procedures
  • Carry out specified approval activities without separate authority approval for every individual action

These privileges are controlled. They do not remove the organisation’s obligation to maintain technical records, retain evidence of compliance or report unsafe conditions.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by YaĹźar BaĹźkurt on Pexels

A DOA holder also has continuing responsibilities relating to design information, product safety and action required in response to unsafe conditions. Design data must remain controlled, identifiable and traceable throughout its approved use.

Production Organisation Approval, Part 21 Subpart G

Part 21 Subpart G sets out the requirements for a Production Organisation Approval (POA). A POA confirms that an organisation can manufacture products, parts or appliances consistently in conformity with approved design data.

The production organisation is responsible for controlling the manufacturing process. This includes ensuring that:

  • Approved design data is available and used correctly
  • Materials and components are properly identified
  • Suppliers are controlled
  • Manufacturing processes are defined and monitored
  • Non-conforming products are controlled
  • Inspection and testing are completed
  • Personnel are competent for their assigned work
  • Records provide product traceability
  • The finished product conforms to the approved design

The organisation documents these arrangements in a Production Organisation Exposition (POE). The POE explains how the production organisation complies with Part 21 and controls its manufacturing and inspection system. EASA provides further information about production organisation approvals.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Terrence Bowen on Pexels

A POA is not an approval of the underlying design. The production organisation must normally work from design data approved or accepted under the applicable certification system. In practical terms:

  • The DOA controls and approves the design
  • The POA controls manufacture and conformity
  • The competent authority oversees the approval framework

A production organisation may also need to coordinate closely with the design organisation when resolving production deviations, proposing changes or addressing defects affecting conformity.

Production release documents

Once a product or part has been manufactured in conformity with the approved design and applicable production requirements, the organisation may issue the relevant authorised release document.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Artem Podrez on Pexels

For many parts, this is an EASA Form 1 or the applicable UK equivalent, depending on the regulatory system and intended use. The release document confirms the production status and conformity of the item. It is not, by itself, evidence that the item’s design has been independently approved. For related guidance on UK and EASA release documents, read EASA Form 1 after Brexit.

This distinction is important. A part may be manufactured to an approved design, but production approval and release documentation do not give the manufacturer authority to alter that design without the appropriate design approval.

UK and EASA production approvals

Organisations with their principal place of business in the UK generally apply to the UK CAA for the relevant UK Part 21 approval.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Eleanore Stohner on Pexels

An organisation whose principal place of business is outside the UK may need to apply for a UK Third Country Approval, subject to the applicable regulatory arrangements. A change to a registered company or Limited Liability Partnership (LLP) number may require a new initial approval rather than a simple administrative amendment.

Following the UK’s departure from the European Union aviation regulatory system, UK and EASA approvals must be considered separately. Recognition may depend on the applicable bilateral agreement, technical implementation procedures and transitional arrangements.

For production, EASA recognises the UK CAA’s Production Organisation Approval in the circumstances established by the applicable arrangements. UK CAA authorised release documentation, including the UK Form 1 where applicable, may also be accepted for the export of parts to the EASA system.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Peter Xie on Pexels

A UK-based organisation does not generally need to hold an EASA Third Country Production Organisation Approval solely because it supplies products to EASA Member States. Organisations must, however, confirm the current requirements for their specific product, customer and export route.

Legacy products and approvals issued before the end of 2020 may also be subject to transitional provisions. Their continuing validity should be checked against the relevant UK CAA Part 21 requirements, EASA guidance and bilateral arrangements, rather than assumed from the original approval date.

What is a Type Certificate?

A Type Certificate (TC) is the approval of the design of a particular aircraft, engine or propeller type. It confirms that the type design complies with the applicable airworthiness, operational suitability and environmental requirements.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Samadee on Pexels

A Type Certificate normally defines the approved type design through controlled technical information such as:

  • Drawings and specifications
  • Structural and systems data
  • Approved limitations
  • Performance information
  • Instructions for continued airworthiness
  • Approved operating characteristics
  • Environmental certification data

The Type Certificate holder is responsible for maintaining the approved design and supporting the continuing airworthiness of the product. This includes evaluating proposed changes, providing technical information and taking appropriate action when a safety issue is identified.

A Type Certificate is not the same as a DOA:

  • A DOA is an organisational approval demonstrating design capability and control.
  • A TC is a product approval confirming that a particular type design meets the certification requirements.

A DOA holder may apply for a Type Certificate, but holding a DOA does not automatically mean that the organisation owns or holds a Type Certificate. The FAA design approval guidance offers a useful comparison with the separate United States certification system.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Лия Маргиналова on Pexels

Changes, repairs and Supplemental Type Certificates

Design changes to an approved product are classified according to their effect on the approved type design. A minor change may be approved under the design organisation’s procedures, while a major change may require a more extensive approval process.

A significant design change that is not made by the Type Certificate holder may be approved through a Supplemental Type Certificate (STC). An STC approves a change to the type design without replacing the original Type Certificate.

Examples include:

  • A new avionics installation
  • A cabin configuration change
  • A structural modification
  • A revised fuel system
  • A new equipment installation

The organisation responsible for the STC must demonstrate compliance with the applicable requirements and maintain the associated approved data.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Felix Mittermeier on Pexels

Repairs are also controlled under Part 21. The repair design must be assessed to ensure that it restores the product to an acceptable condition without introducing unsafe features or compromising the approved design.

How the approvals work together

The Part 21 system can be summarised as follows:

  • Design Organisation Approval (DOA): demonstrates an organisation’s capability to control and approve design work.
  • Type Certificate (TC): approves the design of an aircraft, engine or propeller type.
  • Supplemental Type Certificate (STC): approves a significant change to an existing type design.
  • Production Organisation Approval (POA): demonstrates an organisation’s capability to manufacture in conformity with approved design data.
  • Production Organisation Exposition (POE): describes the production organisation’s control system and procedures.
  • Form 1 or equivalent release document: certifies the production or maintenance status of an individual part or product.

The central principle is conformity. The manufactured product must conform to approved design data, and the design organisation must maintain evidence that the design complies with the applicable certification basis.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Gabriela Chacon on Pexels

Why Part 21 matters

Part 21 provides the regulatory link between engineering design, manufacturing control and continuing airworthiness. Without this link, a certified design could be manufactured inconsistently, or a manufactured product could be changed without proper technical approval.

For aviation organisations, understanding the boundary between DOA, POA and Type Certificate responsibilities is essential. It determines who may approve a design, who may manufacture it, what records must be retained and which authority must be involved.

For engineers managing qualification and maintenance records alongside regulated work, accurate documentation remains essential. Explore the Part 66 Logbook Analysis tool to review your experience records and compliance evidence.

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Kirandeep Singh Walia on Pexels

The applicable requirements should always be confirmed with the relevant authority, the UK CAA for UK approvals, EASA for approvals within the EASA system, or the responsible national authority under the applicable international agreement. FAA approvals, including those under the US certification system, are separate regulatory approvals and should not be treated as substitutes for UK or EASA Part 21 approval.

Ready to strengthen your aviation career records?

Analyse Your Logbook Today!

Part 21 approvals explained: design organisations, production organisations and type certificates
Photo by Brayan Ramirez on Pexels

Login or register to join the conversation.

Join the discussion

0 comments

Active Here: 0
Be the first to leave a comment.
Loading
Someone is typing
No Name
Set
This is the actual comment. It's can be long or short. And must contain only text information.
Edited
Your comment will appear once approved by a moderator.
No Name
Set
This is the actual comment. It's can be long or short. And must contain only text information.
Edited
Your reply will appear once approved by a moderator.
Load More
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Load More